_Portable

mPower MP186 NEO Benzene/Butadiene - Selective Photo-ionization Detector MP186

The NEO BENZ uses a combination of a selective 9.8 eV lamp and benzene filtering tubes to measure benzene selectively in mixtures of hydrocarbons as may be present in fuels or hazardous waste sites.

Model

MP186

Click to consult

Datasheet

Size	9.06 x 3.15 x 2.36 in (230 x 80 x 60 mm)
Weight	24.69 oz (700 g)
Sensor	Photo-ionization sensor with standard 10.6 eV lamp (9.8 eV lamp in MP186 NEO BENZ)
Response Time t90	3 seconds for VOCs 45 seconds with Benzene filtering tubes
Accuracy	±3% (at calibration point)
Battery / Run Time	Rechargeable Lithium-Ion battery with 24 hours typical operation
Keypad	4 operation keys
Sampling pump	Built-in pump @ 450 cc/min, settable to low flow of 250 cc/min Sample from up to 150 ft (45 m) horizontally or vertically
Display	128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight for enhanced display readability
Direct Readout	Real-time reading of gas concentration (ppb, ppm, mg/m3, μg/m3) PID measurement gas and correction factor, lamp on/off, Man-Down alarm on/ off, battery status, pump status, datalogging on/off, wireless on/off, temperature and time
Alarm	Audible (90 dB @ 30 cm), visual (flashing bright red LEDs), and on-screen indication of alarm conditions plus wireless remote alarm notification High, Low, STEL, TWA alarms Over range alarm, battery low alarm Man-Down alarm with pre-alarm and real-time remote wireless notification
EMI/RFI	Highly resistant to EMI/RFI Compliant with EMC Directive 89/336/EEC
IP Rating	P-66/67
Datalogging	Standard 12 months at one-minute intervals Storage interval: 1 to 3,600 seconds (adjustable)
Calibration	Two/three-point calibration
Charging and Communication	Charging, data download, instrument setup and firmware upgrades on PC or laptop via Micro USB Wireless data and alarm status transmission via built-in RF modem
Wireless Range	1,000 ft (300 m) typical
Correction Factors	Integrated Correction Factor list of more than 700 compounds
Safety Certifications	UL/cUL: Class I, Div 1, Group A, B, C, D T4, -20°C ≤ Tamb ≤ +50°C (pending)
Temperature	-4° to 113°F (-20°C to 50°C)
Humidity	0% to 95% relative humidity (non-condensing)
Attachments	Durable rubber boot, color coded for different models; Tube holder for MP186 NEO BENZ
Warranty	2-year warranty including 10.6eV lamp and sensor; 1-year on 9.8eV lamp